Volvo Vcads 88890020

Volvo Vcads 88890020
Optional
PTT developer software for DELL D630( change chassis, unlock speed limited, program parameter, disable immo ect.)

--------------------------------------------------------------------- -----------

Volvo Interface 88890020 is developed for Volvo and Mack heavy vehicles ( trucks, buses, trailers) and egnines. Communication unit enables PC to vehicle communication, the device connects to the PC via USB cable or by WLAN using the 802.11 b/ g connection standards. It� s a great tool for all workshops that work with Volvo and Mack heavy vehicles, this tool also is used by Volvo and Mack dealers workshops. Wireless comunication allows you to work with any Volvo or Mack vehicles more mobile as possible in workshop or outside the workshop if it� s necessary. 88890020 communication interface alows you to do diagnostic operations quickly thanks to high-quality Volvo-Mack software.

Before the 88890020 communication unit can be used, a driver must be installed on the PC. In addition, a utility application ( Admin0020) can be used to check the status of the device and update the firmware if and when needed.
There are three different ways, described below, of connecting communication unit88890020.

Via USB-cable
Connect the communication unit to the vehicle.
Connect the USB-cable between the communication unit and the PC.
Select communication unit 88890020 and USB-cable setting in window Alternative.

Directly to the communication unit
Note: Your PC must have Wireless LAN 802.11b/ g and support for 128 bit WEP ( encryption) , if it is to be used for direct communication with the communication unit. The Panasonic CF29 has this built into the motherboard. Additional Wireless LAN cards will be recommended in the future.
Connect the communication unit to the vehicle.
Select communication unit 88890020 and Direct to communication unit in window Alternative.

Security level Directly to the communication unit
Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is generated automatically and is not seen during the configuration.

Via an access point
Note: Contact the local IT-support or network technician before installation.
Connect the communication unit to the vehicle.
Select communication unit 88890020 and Via an access point in window Alternative.
Security level Via an access point

There are three alternatives for this:
WEP and MAC-address. Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is written in during configuration. The MAC-address is to be written into the access point for additional security. WPA and PSK. Communication is performed via WPA, Wi-Fi Protected Access. 802.1x. Communication is performed using standard EAP_ MSCHAP v2. The communication unit is then treated as a PC and will be logged on to the network using a username and password.

Product description for communication unit 88890020
Communication unit 88890020 has a number of different coloured LEDs. These LEDs show the status of the communication unit and indicate warnings, etc. Refer to the table below for an overview.
Operating temperature: -40 to + 85° C ( -40 to + 185° F) .
Storage temperature: -40 to + 125° C ( -40 to 257° F)

-------------------------------------------------------------------- ------------

Software version : PTT 1.12 VCADS 2.40 multilanguage

Support Brand : All Volvo Bus, truck, construction, ( Nissan UD, Mack only obd2 )